How to use?

Step 1

Hold the switch for 1.5 seconds to power on, tap to select a temperature (75°C works for most users). After using, hold again for 1.5 seconds to power off.

Tips: * There are four temperatures: 55°C, 65°C, 75°C, and 85°C.
* Use higher heat for thicker lashes and lower heat for thinner ones.
* 75°C works for most users.

 

Step 2

Wait 60 seconds for the silicone indicator(on the back of the brush head) to turn white before using. 

Tips: The device is ready when the silicone indicator on the back of the brush head turns from red to white.

 

Step 3

Apply a thin coat of mascara to the base of your upper and lower lashes.

Tips: * Using mascara is essential, as most users have experienced much better results with it.

 

Step 4

Place the heated curler at the base of your mascara-coated lashes, press upward and hold for 10 seconds, then lift. 

Tips:
* It won't burn your lids or harm your lashes.
* Place the heated lash curler at the base of your lashes.
* Ensure it touches your eyelid and hold for 10 seconds. Don't press too hard; just secure it. 
* Thicker lashes may need a slightly longer press.

 

Step 5

For the lower lashes, press directly downward for 10 seconds.

 

Step 6

If desired, apply another layer of mascara to your upper and lower lashes for a longer appearance.

 

 

Manual PDF Download